OGL Single Prong Brass Roller Buckle Leather Belt - Hand Dyed Black
OGL-BELT-ROLL-BLK Seasonal or Limited RunNo tax
Black hand-dyed leather belt with ellipse punch holes and a classic single prong brass roller buckle and keeper - handmade by our good friends Obbi Good Label in Singapore. Constructed with 12oz full-grain cowhide leather, which will age naturally with unique characteristics.
- Made by our friends Obbi Good Label at their workshop in Singapore
- 12oz vegetable tanned cowhide leather
- Hand dyed in black (natural underside and edges)
- 0.16" thick (4mm)
- 1.25" wide (3.2cm)
- Ellipse punch holes
- Solid brass roller buckle with keeper
- 5 Hole positions
- Debossed OGL logo
- Two 'OGL Works' brass screw-post for future adjustment
All measurements are specific to this product. The best way to determine the size you need is to find a similar item that fits you well, then measure the same way we do (see "How We Measure" tab) and compare with the measurements on the table below. Actual measurements for the same Iron Heart item/tag size can vary somewhat so if a specific dimension is important to you (for example arm length) please ask us to check this before we ship by adding a note to your order. Measurements for raw denim garments are pre-soak (allowance must be made for shrinkage).
Inches
Tag Size | XS | S | M | L | XL |
---|---|---|---|---|---|
Belt Width | 1.25 | 1.25 | 1.25 | 1.25 | 1.25 |
Total Length | 42.0 | 44.0 | 46.0 | 48.0 | 51.0 |
Base of Buckle Prong to 1st Hole | 32.25 | 34.25 | 36.25 | 38.25 | 41.25 |
Base of Buckle Prong to 3rd (Middle) Hole | 34.25 | 36.25 | 38.25 | 40.25 | 43.25 |
Base of Buckle Prong to 5th (Last) Hole | 36.25 | 38.25 | 40.25 | 42.25 | 45.25 |