These double-knee overalls are constructed from a 10.5oz 100% cotton herringbone fabric and feature all the details synonymous with our workwear overalls. A double fabric layer that runs from the top of the thigh to the bottom of the knee provides improved durability and is secured at the top of each leg with two brass rivets that express our over-engineered approach to design. Finished with adjustable shoulder straps, triple-needle chain stitched seams and the classic hammer loop on the left leg.
PLEASE NOTE - THIS RELOVE ITEM IS NON RETURNABLE
10.5oz Herringbone Double Knee Overalls - White (IH-812-WHT) Tag 34, Cut to 30.5''
IH-RELOVE-452 One-Off Special
€309
No tax
These double-knee overalls are constructed from a 10.5oz 100% cotton herringbone fabric and feature all the details synonymous with our workwear overalls. A double fabric layer that runs from the top of the thigh to the bottom of the knee provides improved durability and is secured at the top of each leg with two brass rivets that express our over-engineered approach to design. Finished with adjustable shoulder straps, triple-needle chain stitched seams and the classic hammer loop on the left leg.
PLEASE NOTE - THIS RELOVE ITEM IS NON RETURNABLE
- Tag 34, cut to 30.5'', in as new condition, unwashed and unworn
- This pair is currently 'cut' which means they will require hemming to the length you need
- Made in Japan
- 10.5oz 100% cotton herringbone fabric
- Double-thickness knee and thigh
- Brass zip fly
- Belt loops sewn into waist band
- Lined rear pockets
- Triple chain stitched seams with grey bobbin thread
- Tonal double-needle stitching
- Brass rivets
- Copper hip tack buttons
- Double flat stitched front pockets
- Hammer hoop on the left thigh
- Two stacked pockets on the right thigh
- Adjustable shoulder straps
- This pair can be hemmed upon request to 29.5'' or shortened as normal
- PLEASE NOTE - THIS RELOVE ITEM IS NON RETURNABLE
All measurements are specific to this product. The best way to determine the size you need is to find a similar item that fits you well, then measure the same way we do (see “How We Measure” tab) and compare with the measurements in the chart below. Actual measurements for the same Iron Heart item/tag size can vary somewhat so if a specific dimension is important to you (for example arm length) please ask us to check this before we ship by adding a note to your order. Measurements for raw denim garments are pre-soak (allowance must be made for shrinkage).
Inches
| Tag Size | 34 |
|---|---|
| Waist | 39.1 |
| Front Rise | 12.0 |
| Rear Rise | 14.0 |
| Thigh | 14.0 |
| Knee | 10.4 |
| Hem | 10.3 |
| Inseam | 30.5 |
You may need to move the above table left or right to see more sizes.
To view a step-by-step image guide, click here